Current Location : HomePage > Products

Antifoam & Wetting Agent

详细说明

15235103392769040.jpgAntifoam and Wetting Agent are surfactants used in the investment casting shell process to allow the slurries to properly wet the surface of the wax pattern. They are important for a good finish on the final casting.

Usages:

Add and stir antifoam and wetting agent about 0.03-0.1% of the whole slurry according to the real processing conditions during mixing shell slurries. Use Antifoam and wetting agent together with proportion of 0.03% and 0.05% respectively.

Caution:
Flash Point of wetting agent is 34℃, which should be kept from heat source, spark and fire. Avoid the direct contact with eyes and skin.

Storage Condition:
Seal and Store in ventilated, dry and cool place.

previous item: Recycling Wax next item: Water Soluble Wax